Monoprice Monolith Liquid Platinum – First Contact

The Monprice Monolith Liquid Platinum Headphone Amplifier by Alex Cavalli is a balanced version of the highly regarded Cavalli Audio Liquid Crimson amplifier. It is priced at $799.99

Disclaimer: The Monprice Monolith Liquid Platinum sent to us for this review is a paid-for sample. We thank the team at Monoprice for giving us this opportunity.

To read more about Monoprice products we have reviewed on Headfonics click here.

Everyone in this sector knows about Alex Cavalli’s headphone amps. You pretty much have to pry an ‘Alex creation’ from an owner’s cold dead hands these days because sadly the company is no longer in business. That is why I am so delighted to see his skill and know-how live on, albeit with tweaks, in the Monoprice Monolith range.

If truth be told it really surprised me that it was Monoprice who picked up the IP on Alex’s amplifiers. I was expecting it to pop up in some niche boutique firm but no, Monoprice is big business. Their Monolith range is chock full of his gear such as the Liquid Spark Mike reviewed earlier this year.

I handpicked the Liquid Platinum for a review, (and paid some monies!) based on the feedback from Liquid Crimson owners. We have not done a lot of tube amp reviews this year so this mid-fi $799.99 creation seems a good fit for a shopping season review.

Backstory

The hybrid tube amp Liquid Platinum origins actually pre-date the Crimson despite it making the light of day long with a Monoprice sticker well-after. Call it costs of production and the then relatively boutique nature of Cavalli Audio. It also was scaled back a little in terms of brute force power which allowed everything managing that power to be shrunk down a little with it.

Now, it is smaller, still with a ton of power (3.6W) and even more interestingly, comes with both a single-ended and balanced topology (phase splitter design) whereas Crimson was just a single-ended circuit design.



That’s two for half the price of one albeit a crudely high-level statement because there is a lot more to it than that. The output stage is identical to the Liquid Crimson but converted into a balanced amp.

The original Liquid Platinum prototype was making the rounds on some audio shows a few years ago before Cavalli Audio closed down so a lot of the donkey work was complete before Monoprice came in. The Monoprice deal opens up a huge market audience to something boutique firms can only dream about, as well as getting that juicy price point that tips it more to the affordable side.

Monoprice Monolith Liquid Platinum

Unboxing & Accessories

The packaging for the Liquid Cavalli is nothing fancy but it gets the job done. My black cardboard retail box arrived with a few dings on the outside but the amp was well protected so it did the job. Inside you get a polystyrene type hard foam cut out that protects the various components, the amp in a cloth bag, some very nice 6922 Electro-Harmonix NOS tubes and the power supply.

I would have loved to have seen at least a basic dual unbalanced RCA IC cable in there just to get up and running out of the box. I have tons, you may not. That’s an additional $20 from your local DIY store and upwards depending on how hardcore you are.

The cloth bag I guess protects the amp from dust and polystyrene bits from creeping into the tube openings and going on fire from any latent heat when in operation. You could sack it up when not in use also to prevent dust creeping in.

Power Supply

The power supply is a switch-mode DC 36V 1.5A power supply, (SMPS). Nothing linear or a hefty internal toroidal type transformer. There may be a cost issue there and certainly, noise might be a factor but given the size of the design, it was always going to be the case that the power supply is external rather than internal. This also helps keep the weight down on the main body.

Monoprice Monolith Liquid Platinum

Design

A few things right out of the box. The first, the amp is a lot smaller than the pics would lead you to think. I would class it almost on the “cute” side size-wise and without the tubes in you could bag it and take it to the office without too much hassle. Transportable? Possibly.

The second is aesthetic. It is harmonious with its smaller sibling, the Spark, but bigger. I am not quite in love with the angular shape and vibe as a tube amp, I tend to prefer the retro SET stylings such as the Studio 6 from ALO Audio or the wood-inspired Auris Audio gear.

However, the Liquid Platinum is pretty low-profile, quite modern looking and robustly built. It will take a fair old drop to put this out of action and the joints or panel fits are fairly seamless also. The little rubber feet add some welcome grip also, especially as I tend to put desktop units on tempered glass racks which can slip and slide if not securely in place.



Monoprice Monolith Liquid Platinum

The tubes are top loaded into some deep and fairly tightly spaced sockets. I would be looking at a pair of socket savers in the long run as the initial rolling is pretty stiff. You have to be fairly gentle to ease them in and out, at least initially until the socket loosens up a bit.

Monoprice Monolith Liquid Platinum

To the sides, you have some pretty long vents which are mandatory for me as the Platinum can generate a fair amount of heat. This is not a design that should be stuck in a tight space as it will need plenty of ventilation. The size though makes it fairly stackable and at 1.5Kg not that heavy either.

Monoprice Monolith Liquid Platinum

Features

The Liquid Platinum has no internal DAC but as a standard analog amp its actually packing quite a few useful connections. You get 4 different types of amp variation with that phase splitter design that allows you to use them all in balanced mode if you prefer. You can go SE to balanced, SE to SE, balanced to SE and balanced to balance.

On the rear panel, you have two SE inputs that are switchable. Underneath those RCA inputs, you have a small I and white dot icon denoting which input is which for a selectable switch on the front panel. Beside the unbalanced inputs are the traditional 3-pin XLR balanced sockets and to the far right your switchable power socket. If you note, just underneath are some additional venting slots to aid in the overall cooling of the Liquid Platinum.

Monoprice Monolith Liquid Platinum

To the front, you have small buttons to the far left and right for power and selecting your input to output mode (remember the 1 and o at the back under the SE inputs). Front and center are your quarter jack SE and 4-pin XLR balanced jack outs with a very smooth analog potentiometer just to the center-right.

The Liquid Platinum is a pure headphone amp so there are no pre-amp functionalities and no auxiliary 3.5mm line-ins either. If you want to run a DAP in LO to the back of the amp you will need a 3.5mm to dual RCA cable to connect it up. Otherwise, it is pretty much a standard DAC to amplifier chain.

There is a new Liquid Platinum Balanced DAC for $499 recently announced that is designed to stack and mate with the Platinum. That is something we hope to follow up with also some time in the near future.

Monoprice Monolith Liquid Platinum

Initial Sound Impressions

Out of the box I have put in about 20-25 hours before forming some initial impressions. By the time we get to the main review, it should be over 100 hours. Testing was done with the excellent Rosson Audio Design RAD-0, Diana Phi and the Meze Empyrean.

Power

First, power. No issue here with a lot more on tap than current office favorite, the Auris HA-2SE. Single-ended is very good but the magic of this amp seems to be more on its balancing output performance. It has plenty of slam and the dynamic range is excellent using the balanced stage.

Source Synergy

DAC’s will influence the final tuning and I do find that a neutral and clean DAC is a better match thus far than warmer DAC’s like the Yulong DA10. The DA10 is warmish and full-bodied on the low-end but a touch soft and fades as you progress up the FR. The Qutest shows off a better level of dynamic range and punch on the Liquid Platinum and also delivers better upper treble articulation. The clarity and PRaT are more convincing for me with the Qutest pairing.

Monoprice Monolith Liquid Platinum

Timbre

So far, what I am hearing is a full-bodied and punchy low-end, an even-harmonic balance up into the mids with a slightly forward but richly textured vocal delivery. I did some initial comparisons with the Auris HA-2SE and Qutest pairing and I found its stock tube presentation to be a bit more neutral, especially in the mids.

Treble is a little rounded and fairly wet and smooth but definitely not lacking in resolution. There seems to be a little uptick in the upper treble performance of the selected headphones for this initial run through that prevented the pairings from sounding dark. Warm and a bit close maybe but definitely no veil or lacking in air.

I think I prefer this right now with the Empyrean over the RAD-0, the tuning of the Empyrean seems to pair ever so slightly better for mids than the RAD-o. It is creamy in part but definitely not smoothed over with the Empyrean. This is a detailed and very relaxing listening experience, especially for soulful vocal performances.

Monoprice Monolith Liquid Platinum

Stay Tuned!

Yeah, I already have a feeling this is going to be an excellent outcome for the main review. I was not sure what to expect before my initial impressions. It is a curious branding partnership but it does work and works really well indeed with the Liquid Platinum.

This is an even-harmonic, close and mid-forward listening experience and slightly less neutral-sounding compared to the likes of the Auris HA-2SE (stock tubes). It does seem to like a revealing source and I do prefer clean compared to warm DACs.

The punchier the source the better also because the Liquid Platinum does seem to have the cojones for a solid level of PRaT and plenty of power on tap for demanding headphones. Going balanced is already the key here my friends.

I doubt I will be tube rolling in the main review unless I can source some better tubes locally, (which is never easy in our location). Hopefully, I can but the 6922 EH tubes I liked before so it is nice to see them as the stock tube out of the box. Stay Tuned!

Monolith Liquid Platinum Specifications

Model33305
Frequency Response10Hz-50kHz ±0.05dB
Included Tubes2x Electro Harmonix 6922
Output PowerBalancedSingle Ended
33Ω6.62 watts1.78 watts
56Ω4.21 watts4.21 watts
150Ω1.74 watts0.45 watts
300Ω0.91 watts0.23 watts
THD+N @1kHz w/47R Load Balanced Input1 Vrms: 0.0020% THD+N @ 1kHz
5 Vrms: 0.0020% THD+N @ 1kHz
IMD CCIF w/47R Load Balanced Input1 Vrms: 0.0006%
5 Vrms: 0.0015%
IMD SMPTE w/47R Load Balanced Input1 Vrms: 0.0006%
Gain14dB (5x)
Noise-98dB (Balanced)
-89dB (Single Ended)
Crosstalk w/47R Load Balanced Input-88dB
Channel Balance0.3dB
Output Impedance< 0.14 Ohms Balanced
< 0.07 Ohms Unbalanced
Headphone Outputs4 Pin XLR (Balanced), 1/4″ TRS (Single Ended)
Audio OutputUnbalanced RCA
Audio Inputs3 Pin XLR Balanced, Unbalanced RCA Single-Ended (converted to balanced internally)
Dimensions8.8″ x 8.5″ x 2.0″ (222 x 216 x 51 mm)
Weight3.2 lbs. (1.5 kg)
Share the news!
  • 36
  •  
  •  
  • 1
  •  
  • 1
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
    38
    Shares

Leave a Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.