RHA T20
Headfonics 2015

RHA T20 Review

The RHA T20 is a single dynamic driver universal IEM featuring the company’s proprietary DualCoil™ driver technology and switchable filters. It is priced at $239.95.

Disclaimer: The RHA CL2 was sent to us is a discounted sample in exchange for our honest opinion. We thank RHA for this opportunity.

To learn more about RHA products on Headfonics you can click here.

Slide here to add your score on the gear!15 Votes
7.4
7.4
Score
Discontinued

I am a big fan of RHA and its line of cost busting earphones. The MA750 single dynamic driver for under a hundred quid really upped the expectations of what a relatively cheap earphone could and should sound like.

The packaging and accessories were way above anything else out there in the market. Their even cheaper MA-350 which we reviewed way back in 2012 still looks and sounds great for the price.

The pace of development in RHA is actually what is breathtaking, almost ‘FiiO-Esque’ in their revamping, harmonization of design philosophy, and shared R&D.

Even as I write today they have a new budget-busting S500i single dynamic driver unit coming out for £39.95 which I presume will take center stage from the MA-350. IN the short space of 3-4 years RHA are becoming the darlings of budget-busting earphone tech in much the same way FiiO cornered the budget-busting portable amp market.

The T10i

The one slight roadblock they had was the launch of the T10i last year. I say roadblock more like a speed bump in taste rather than technical ingenuity because the T10i was pure eye candy at just under $200 and at that time the most expensive unit in the RHA range. Metal injected molding, 3 filters, the always excellent accessory package, and indestructible cable – this seems a sure-fire winner.

Technology-wise, fit wise yes it won, it’s still one of the most handsome units in the market today but the sound signature polarized the audiophile community who felt the more balanced MA750 signature was the way to go.

The T10i was a bass heads dream, even on the treble filter, it spits out visceral bass. It was a bass head signature done very well indeed but nevertheless a consumer sound that alienated a few hardcore fans.

I was on the fence myself during the review and it wasn’t until I threw it into a Bakoon HPA-01M portable amp and a dose of Major Lazer did I get blown away by the sheer brute force and depth of the bass the T10i was capable of. But it was a lonely night in Georgia for everything else.

The T20

The new T20 is apparently RHA listening to their customers and deciding to launch a new T10i but with a more balanced and, dare I say it, more audiophile sound presentation.

In theory, whatever reservations I had about the T10i should be blown away by the T20’s revamped sound signature.

The New DualCoil™

It is also the first time RHA has shown to us their new proprietary DualCoil™ driver technology which separates the coils and focuses each one on different aspects of the frequency range response.

The outer coil targets the mids and treble whilst the inner coil targets the bass. Both of these coils are independently powered voice coils designed to maximize the response from each so in theory, it’s almost like a very well-tuned dual-driver all in one.

Design

The T20 also sports the same Westone Sure Fit ergonomics from the T10i and is created using the same excellent metal injected molding (MIM) system. It’s still a looker, blemish-free, and a very robust earphone much like the T10i.

It does weigh quite a bit more than conventional plastics molded earphones at 39g but slightly less than the T10i by 2g. It is probably one of the heaviest small IEM’s I have in the hand but the distribution of weight and small form factor means they sit flush and easy in my ear without any discomfort on the outer ear.

RHA T20

Seal

The seal of the T20 is just excellent at this price range, or at any price range for that matter for a universal IEM. There is no sweet spot hunting and they work straight out of the box on the pre-fitted single bore silicone tips.

The fit is even better with my usual double flange tips and the memory foams that come as part of the usual excellent range of tips RHA provides in their eye-catching steel plate holder.

The Cable

Not being part of the “i” series the T20 is missing the ‘Made For IPod’ controls on the T10i which lessens the bulk on the cable. The cable itself is the same 1.35m multi-core OFC cable they used on the T10i terminated with a gold plated 3.5mm jack in their usual attractively branded metal jack housing. The strain relief around the jack is also the same with the tightly coiled spring coil.

One small difference I did note on the T20 over the T10i was the memory wire which is now coated with the same sleeve materials as the rest of the cable, unlike the T10i which had a more transparent plastic white coating. It looks better and more integrated on the T20 now.

The T10i cable looks a bit messy side by side to the more monotone and subtle finish on the T20 cable.

The Filters

The T20 also comes packed with the same filter technology of the T10i with a small metal silver plate holding the treble and bass filters in champagne (treble) and black colors (bass) and the reference filter pre-fitted out of the box.

I had pondered during the course of the review if this is not a slightly missed opportunity to revisit the filter system and perhaps introduce something a bit different. It is nitpicking but it is a new earphone so perhaps some new filters?

Perhaps RHA would consider selling filter packs and go modular much like Hifiman with their amp cards. Certainly, a mid-range or vocal presence filter would come in handy as the “4th filter” just to give an added dimension.

RHA T20

The Rest

The T20 packs the same accessory range as the T10i. That means you get the nice little leather case, a shirt clip, and that excellent matching metal tip rack which slots in nicely under some nylon straps inside the holding case. The tips included are:

  • 6 pairs, dual density ear tips – S x2 / M x2 / L x2
  • 2 pairs, double flange ear tips – S x1 / M x1
  • 2 pairs, memory foam ear tips – universal fit

All of this is backed up by that fabby 3-year warranty from RHA which by all accounts on the forums has been a pretty painless claims process for those who have tried it.

Sound Impressions

Tonality

(Using the reference filter/double flange tips)

The T20 is a more aggressive warm to slightly neutral tonality than the T10i. It also has a more prominent upper midrange and treble performance. Everything is a touch more forward with plenty of sparkle and energy, especially around the 2-5k range.

The bass still has a strong bias but this time it’s not a hugely colored experience like the T10i. I still rate the T20 as a musical IEM built for modern musical genres but this time everything just feels more controlled and tighter making it a far more flexible than the T10i.

Bass

Bass, whilst still an aggressive force on the T20, is now much tighter and better defined than the T10i though slightly leaner. The T10i went for just a huge dollop of bass that had a decent pace and great slam and depth but lacks the clarity and texture of the T20.

The T20 just has a bit more energy and speed in its low-end response to make it a more engaging experience. The bass on the T20 feels far less exaggerated and a little bit more accurate than the T10i which actually sounded somewhat loose after side by side comparisons.

Mids

The T20 midrange is a whole different ball game now to the T10i. This time it has more of an edge, especially in the upper midrange vocal presence. The T20’s vocal presence now is more forward, open, and far more engaging.

I would draw the line to say the T20 is a mid-centric earphone in its own right. It does sport a u shape overall and there is a slow dip from the bass from around 300hz into the lower mids that lacks a tiny bit of bite.

That dip continues until around 1k and rises around 1-3k making the vocal range stand out that little bit more alongside the bass. However, it doesn’t continue to rise as you transition further into the upper range instead preferring to gently level off beyond 5k with some minor ups and downs.

Treble

There is far less tapering in the treble performance and a greater sense of space in the T20. The extension is a very welcome addition to the T20 over the T10i. It adds a very satisfying level of articulation and sparkle. I really didn’t get the feeling there was any uneven peaking, especially in the lower treble performance.

That leveling off at 5k with only a few minor bumps up to 10k meant the T20 has a nice consistent level of clarity and energy but never sounded overly sharp or hot. Certainly, it is a very different experience to the laid back treble performance of the T10i even with the treble filter thrown in.

RHA T20

Bass Filter

The bass filter does exactly what it says on the tin. The T20 bass goes up quite a few notches but unlike the T10 tuned with the bass filter which was quite wild and distracting to the point of, well, pointless, this time I actually quite enjoyed the bass filter with the T20.

Yes, it turns it into a bass head IEM but this time the treble stays reasonably clear and strong and the signature takes on a more v shape type response curve which is ideal for EDM. It slams hard but the definition is still tight, the snap is still there and there is very little bloating.

Treble Filter

Personally I would not have called this filter the treble filter when matched with the T20. Perhaps the neutral or flat filter and certainly more ‘reference’ than the reference filter.

Rather than emphasize the treble for me it tones down the bass and fullness of the sound overall so you get a much more even response but one which lacks a little musicality compared to the reference and bass filter. It won’t work with EDM this time and it is far less v-shaped than the bass filter.

I wouldn’t call it analytical either but it is a more linear tuning I would tend to use for testing and reviewing than the other two. As such I consider this one as my personal ‘reference filter’ but I can well understand why others would choose the labeled reference filter as their tuning of choice given its good balance between fun and accuracy.

Matchability

Volume

Am I reading this right? 16ohms at 90db? That’s a very interesting sensitivity rating for an IEM with even the Hifiman HE400i chiming in at 93db and a 12db drop from the original T10’s rating of 102db.

I would hazard a guess and state that the dual coil technology just needs that little bit of extra juice to get both coils working at optimal levels compared to the older single-coil T10 or any single coil dynamic out in the market today.

Yet in reality, the T20 sounds louder at similar levels to the T10 despite those ratings on paper suggesting otherwise. I am getting far better responses from the T20 right across all my DAPs at the same volume level settings I used for the T10.

For the DX90, 195 is plenty fine but 200 is where the T10 starts kicking in. On the Gen FiiO X5,

the T20 sounds optimal at 60 on its digital volume compared to the T10i starting to flex its muscles almost 10 steps higher at 68-70.

That’s testimony to this new driver I guess and something I didn’t expect just by reading the stats. It really makes the older T10i driver seem the more inefficient one by far.

RHA T20

DAPs

The T20 is a more flexible IEM for pairing with DAPs over the older T10i especially now with the filters having a more desirable switch up on the signatures than before. You do not need to find a neutral source this time to get the most out of the T20’s response.

Something like the DX90 or the Cayin N6 will pair very well indeed with the DX90 sounding excellent with the reference and treble filter and the Cayin N6’s very detailed and transparent signature working well with the bass filter.

The bass dynamics of the DX90 is never my favorite signature where there is already an enhanced bass response. I prefer to keep things as even as possible. The Lotoo Paw Golds warmish yet highly resolving profile matched incredibly well with the T20’s treble filter also providing a slightly better level of separation and soundstage than some of the other DAPs mentioned.

Amps

Bakoon HPA-01M

Its perhaps unfair to throw a $1200 portable amp in the mix strapped to a $2000 DAP but the Paw Gold/Bakoon HPA-01M pairing with the T20 is completely off the charts compared to jacking it straight from a DAP, regardless of filter. The T20 still requires a bit more juice than most so if you are considering a pairing I would recommend you do try amping to get optimal levels.

With the Bakoon you get far greater dynamics, a much better soundstage, and fuller more engaging sound overall. The drawbacks though is the awful low-level channel imbalance on the Bakoon so for those who like it quiet best save the money and go for a high performing IEM amp.

Theorem 720

I didn’t quite have the same low levels of background noise using the T20 on the Theorem 720 as I had with the T10 sadly. It’s relatively minor on the low gain but very noticeable on mid and high gain.

Just like the Bakoon, I can’t reach a zero noise level also on the pot with audio still noticeable even at zero and I have slightly less play on the volume pot than I had with the T10i.

That being said once you hit 8-9am on the Theorem 720 the audio quality when paired with an iPod classic and the T20 is excellent. Not quite the same as the Bakoon in terms of dynamics but the micro detail and clarity are just excellent and the detail on the vocal presence is outstanding for an IEM at this price level.

RX/Picollo

Like ying and yang, you can’t talk about one amp with referencing the other. The RX is big on dynamics, speed, and neutrality whereas the Picollo is the smoother, bass weighted intimate analog amp. If you’re planning to stick with the reference filter either amp will be just fine with very easy pot control on both but tonally I gave a slight edge to the Picollo.

Even with its slightly weighted bass response over the RX I preferred how it kept the treble slightly smoother and more flowing especially when using the treble filter. The RX ran a little hotter on the top end for my liking and didn’t quite have the same fullness I got in the midrange with the Picollo.

RHA T20

Our Verdict

It could be argued this entire review is a statement of preference and in some ways, you would be right. There are some who really loved the T10 and I can understand why but for me the T20 is a step up in terms of balance, clarity, and usefulness of the filters. Each filter now has a defined effect that I find favorable and interesting whereas before the T10i treble filter was the only filter I found to have the best balance.

Audiophiles will prefer the T20 over the T10. Whilst both technically have a fun signature the T20 is the more accurate of the two with a cleaner and more extended treble performance and a more convincing vocal presence.

It also seems to be a more efficient IEM despite the specs on paper and on many occasions it outperformed the T10i on similar volume settings from both DAP and amp.

I would love to see more modular filters come out much like the Hifiman DAP amp cards. I think there is mileage in that. The U shaped (some would say even slight v shape) frequency still has some mild weakness in the lower midrange and the bass is still a prevalent factor.

Throwing in some sort of filter focused on the midrange (think the presence switch on the SA-43 customs from M-Fidelity) would be very welcome indeed. Should I retire the T10i from circulation now that the T20 is out? Most likely I will, it’s altogether the snappier and more satisfying IEM of the two.

RHA T20 Technical Specifications

Drivers DualCoil™ Dynamic
Frequency range 16-40,000Hz
Impedance 16 Ohm
Sensitivity 90dB
Rated/max power 2/5mW
Weight 39g
Cable 1.35m, multicore OFC
Connections 3.5mm, gold plated

Sharing is caring!